19 mm sits between standard and wide. Woolet bespoke starts at 20 mm and signature frames run 25 mm.
19 mm is a standard bridge. On a wider nose it perches - see what happens.
THE NOSE BRIDGE
Wide enough frame. Wrong bridge.
Face width is only half the fit. When the bridge is narrower than your nose, the frame can't sit down. It rests on two pinch points, leaves a gap above them and lifts the top rim into your eyebrows.
1 · Gap under the bridge - The bridge arches over the nose, not onto it.
2 · Frame rides up - The top rim lands on the brow line.
19 mm bridge
too narrow for a wider nose
Touches at two pinch points
Gap above them
Frame lifts into the brows
Woolet keyhole bridge
25 mm, built for wider noses
Rests along the whole flank
No gap, no pressure points
Eyes centred, brows clear
Width is not only temple to temple. FitLens measures your bridge too.
Not built at 19 mm. Signature is 25 mm on both the 007 and the 009. Bespoke doesn't go below 20 mm.
19 mm is the transition zone between mainstream and wide-face eyewear. Standard bridges run 16–18 mm; wide bridges start at 20 mm. Woolet signature bridges are 25 mm on both the 007 and the 009.
Signature bridge: 25 mm keyhole (007 and 009). Bespoke 20–26 mm.
It's borderline. Standard bridges are 16–18 mm, wide bridges start at 20 mm.
What bridge does Woolet start at?
20 mm in bespoke. Signature frames: 25 mm keyhole on both the 007 and the 009.
Should glasses cover your eyebrows?
No. The top rim should sit at or just below your brow line. When your glasses cover your eyebrows, the bridge is usually too narrow for your nose: the frame rests on two points high on the nose, so the whole front lifts. A bridge that matches your nose, like Woolet's 25 mm keyhole bridge, lets the frame sit lower with your eyes centred in the lenses.
Why do my glasses sit high on my nose?
The bridge is narrower than your nose. Instead of resting along the sides of the nose, the frame touches at two pinch points and leaves a gap above them. Measure your bridge width (FitLens does it in 60 seconds) and pick a frame with a matching bridge.
What bridge width do I need for a wide nose?
Most standard frames use a 16-19 mm bridge. A wide nose usually needs 21 mm or more. Woolet frames use a 25 mm keyhole bridge, and Bespoke frames are cut to your measured bridge.